Plug and drive ecoobd2 economy chip tuning box for benzine fuel sa
Plug and Drive EcoOBD2 Economy Chip Tuning Box for Benzine 15% Fuel Saving
It Works Based OBD2 Protocols as Remapping the Car's Computer ECU.
After Driving 200 km Road Total, EcoOBD2 Adjusts Itself to the Car, According to the Drivers' Habits and Always Keeps Remapping the ECU to Save Fuel Lower and Immission.
EcoOBD2 Chip Tuning Box and Remapping Tuning Methods is that EcoOBD2 Chip Tuning Box is Easily Removable, and after Unplug You Go Back to the Factory Settings.
EcoOBD2 is the Cheap and Safe Type of Tuning. Remapping is a Permanent Change to Your Car. EcoOBD2 is Equipped with the Engine Protection Function and 100% Safe for Your Car Engine.
What is EcoOBD2 Chip Tuning Box?
EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the fuel consumption of your car. When it plugged into OBD2 connector
EcoOBD2 receives the information from the car computer ECU. With the received data from ECU, EcoOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to decrease the fuel consumption of your car.
EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
EcoOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug EcoOBD2 from OBD2 connector.
How to use?
Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on.
EcoOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment.
EcoOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving, and then EcoOBD2 adjusts itself to match your car perfectly.
Installation and Calibration steps:
1 Pull the Car Key out from the ignition.
2 Find OBD2 connector(*) in your car and Plug in EcoOBD2
3 Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4 Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)
5 Start up the engine.
6 EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.
1 x EcoOBD2 Economy Chip Tuning Box
Other ads from this seller
Car rear view camera monitor wireless transmitter and receiver kit
Flexible led strip light drl daytime running lamp
Pair of rgb car width lamp
Generic 12v 6a smart fast battery charger for car motorcycle
Diy silver 15m 6mm car auto chrome moulding trim strip
Car solar power led fake dummy alarm warning security anti-theft flash
12v universal windscreen washer pump bottle kit cleaning tools
Car auto super power loud audio dome speaker tweeter 2 pcs
Car long lasting defogger
Car gas pedals versatile professional durable decorative car pedals