Iks aquastar aquarium controller
The IKS aquastar is a state-of the start system of modular construction that caters for all of your needs where automatic monitoring and control of every major water and lighting factor is concerned for both fresh- and seawater aquariums. With it, you can build up your own individual system to suit your personal requirements and your pocket.
Besides extensive timed functions, you also have at your fingertips measuring modules for pH-value, redox potential, temperature, conductivity, waterlevel, oxygen and air pressure (not included). Up to eight of these modules can be connected to the system in any combination. Thus, it is possible, for example, to take multiple pH measurements (e.g. in a calcium reactor and in the aquarium) or even in several tanks quite independently of each other.
Logical and easy operation. You can connect up to 4 socket panels, with 4 sockets each. You can programme up to 32 timer functions. The shortest switch interval is only 1 second long. Additional programmable functions are: interval functions, day/night-simulations, lunar-phase simulations, nocturnal reduction and pulsating simulations. Acoustic, visual and external alarm. Automatic sensor recognition and calibration with sensor test. Display of salt content, density or mS in seawater. Readings memory for 2000 chains of readings, buffered by storage battery. Al data can be transfered to a PC. With illuminated LC-Display.
Dimensions: 24 x 13,5 x 3,5 cm
Power consumption: max. 5 watt
Processor: INTEL 80C535
Conventional memory: 128 kByte RAM (buffered)
Programme memory: 64 kByte Flash
Inputs: 8 sockets for any iks modules
Interface: Serial PC-Interface
Display: LC-Display (2x16 characters)
Outputs: 16 TTL switch outputs
A system that grows to suit your demands
The extendable multi-purpose system - your 24-hr helping hand
The aquaristics computer iks aquastar is a state-of the art system of modular construction that caters for all of your needs where automatic monitoring and control of every major water and lighting factor is concerned for both fresh- and seawater aquariums. With it, you can build up your own individual system to suit your personal requirements and your pocket.
Regardless of whether you want a good-value means of monitoring and regulating lighting, temperature and pH-value in your tank with a standard set-up or you want to automate as many extra functions as you can think of, the iks aquastar is the answer! Besides extensive timed functions, youalso have at your fingertips measuring modules for pH-value, redox potential, temperature, conductivity, waterlevel, oxygen und air pressure. Additional modules are currently undergoing development. Up to eight of these modules can be connected to the system in any combination. Thus, it is possible, for example, to take multiple pH measurements (e.g. in a calcium reactor and in the aquarium) or even in several tanks quite independently of each other.
A WORD ABOUT OPERATING COMFORT:
While developing this system, our engineers always gave the greatest priority to easy, user-friendly operation. One of the outcomes of this is an intelligent menu-driven control procedure as yet unequalled by any other system.
What is meant by intelligent menu-driven control?
logical and easy operation.
You can connect up to two socket panels, with 4 sockets each, to the iks aquastar midi. That means 1
plus 8 controlled sockets. These are also available in a variable-output version for extremely realistic
With the iks aquastar midi you can programme up to 32 timer functions (with weekday function). The
shortest switch interval is only 1 second long. This enables you, for example, to add minimal amounts of trace elements evenly and automatically with the help of a dosing pump (such as the iks Vario). (The
dosing pump iks Vario MP 045 feeds an amount of only 0,075 ml per second at its lowest setting.
The interval functions can be individually adjusted to suit your own requirements. The active and passive phases of the interval duration can be set separately from each other, whereby a random factor (time) can be given for each one.
The extensive day/night simulation makes child's play of your aquarium's lighting and optimises it too. You can use it to set a wide variety of lighting on- and off times. If the lighting you use can be dimmed, you can simulate sunrise and sunset. It's even possible to recreate the sunrise and sunset of a particular region of the world (by entering the latitude and longitude.This function even makes the period of the
reduction in nocturnal values possible (pH-value, temperature, current etc.).
The integrated lunar-phase simulation gives you everything you want. You can choose between two
alternatives. A practice-related one for the "aquarium enthusiast" and the and one for the authentic
simulation of moonlight (for coral cultivation), taking into account the duration as well as the intensity of the light. It too allows you to simulate the lunar phase of a particular region of the world, the tropics for example (again, by entering latitude and longitude!
There is also a very wide spectrum of possibilities for current simulation such as pulsating waves or
high/low tide. No matter how large your aquarium is and regardless of the shape it may have, this
simulation function, thought out right down to the last detail, makes it possible for you to create the
optimum current for any tank. You can control up to 16 pumps!
In the "professional" programming level, up to eight different control processes can be carried out using one measurement and control module. An example: The tank-floor heating system on Socket 1 is
activated at 25° C. If the temperature continues to fall to 24.5° C, a heating element on Socket 2 will cut in. If the temperature in your tank becomes too high, a fan/cooler on Socket 3 can be activated at, say, 27°C. For all these functions you can add different values for day/night and summer/winter, too.
All control processes can have upper and lower alarm limits allocated to them ( with the exception of
waterlevel for which a time alarm can be entered for maximum safety).
Acoustic, visual and external alarm .
Automatic calibration with sensor test (for pH, redox, conductivity, oxygen).
Display of salt content, density or mS in seawater aquariums (with conductivity module only).
Using the iks aquastar any of the measured values can be stored and transferred to a PC at any
intervals you decide upon. Thus, 2000 chains of measurements (one chain comprises date, time and the values of all the connected sensors) can be stored in the memory. The lead required to do this is
available from iks. The software necessary for transferring the data to your PC (iks-datastar) is can be downloaded free-of-charge in the section "Software" on this website. With the help of your PC you can recognise and identify long-term trends and interdependencies between the most diverse factors in your aquarium. A PC programme for comfortable evaluation of data (graphs, database, tables, online display etc.) is currently being developed.
Set for the future with the update function: As the whole system is constantly undergoing further
development you have the opportunity of installing the latest programmes (functions) from the Internet with a PC. That means : You are always up-to-date!
Absolutely excellent value for money!
You might be interested in
Decorative for aquarium
Decorative for aquarium
Decorative for aquarium
Ozoniser for water
Uno magnetic drive pump
Aquarium air pump
Api saltwater master liquid test kit
Αυτοματο συστημα ταηζματος ψαριων
Lava rocks for aquarium