Dahua hy-ft443hfp - en54 thermal flame detection camera €1.860 №6862425 in Επαρχία Λεμεσού - Συστήματα ασφαλείας - sell, buy, ads on Bazaraki.com
Dahua hy-ft443hfp - en54 thermal flame detection camera
35 λεπτά πριν
0
1 / 5
Αριθμός αναφοράς:
3485
Κατάσταση:
Καινούργιο
Περιγραφή
Μετάφραση σε:
Dahua HY-FT443HFP – EN 54 certified thermal flame detection camera with 5MP video, in stock in Limassol, with free same-day delivery in Limassol and delivery across Cyprus.
Smoke detectors work well in offices and homes, but in warehouses, car parks, workshops, farms, solar plants and outdoor storage areas, smoke rises too high or blows away before a ceiling detector reacts. A flame detection camera solves this by watching the area directly: it detects the infrared signature of a fire, checks it with thermal imaging and AI, and lets you verify the alarm on live video before anyone is sent. This Dahua camera from the Wisualarm fire safety range is the Pro version, with three detection technologies in one housing.
In short – Dahua HY-FT443HFP: a bullet-style flame detection network camera with triple-IR flame sensors, a 256×192 thermal camera, a 5MP colour camera, smoke and flame AI, temperature alarms, two relay outputs and EN 54 certification for Class 1, 2 and 3.
Dahua HY-FT443HFP: key features
Three ways to detect a fire
Triple-IR flame sensors at 3.8, 4.5 and 5.0 µm with three sensitivity levels – the same method a professional flame detector uses to tell a real fire from sunlight, lamps or hot surfaces.
Thermal flame and heat detection with a 256×192 vanadium oxide thermal camera – detects a 20×20 cm flame at up to 35 m.
Smoke and flame shape AI on the 5MP colour camera – recognises smoke and flames at up to 30 m (0.1 m² n-heptane fire).
EN 54 certified detection
The camera is certified to EN 54 for Class 1 (25 m), Class 2 (17 m) and Class 3 (12 m) with a 0.1 m² n-heptane test fire – the European standard for fire detection equipment, required by insurers and fire consultants for many commercial projects.
See the fire, not just an alarm
5MP colour camera (2592×1944, 4 mm lens) for clear visual verification, with IR night vision up to 50 m.
Built-in speaker (70 dB+) and microphone for a local sound alarm and two-way audio.
Temperature measurement from −10°C to +500°C with point, line and area rules – useful for electrical cabinets, machines and stored materials.
Connects to your systems
2 dry-contact relay outputs (fire or fault), 3 alarm inputs, Gigabit network, ONVIF, microSD up to 256GB and FTP/NAS recording. Use the relays to signal a fire alarm panel, sirens, lights or a building management system.
Built for outdoor and industrial sites
IP67 housing, operating from −40°C to +60°C, powered by PoE (802.3af) or 12–24V DC. It also includes perimeter protection (tripwire and intrusion with human and vehicle classification) and smoking detection.
Dahua HY-FT443HFP: where to use it
Warehouses and logistics with high ceilings where smoke detectors react late.
Car parks, EV charging areas and fuel or gas storage.
Workshops, factories and recycling or waste sites.
Solar plants, farms, hotels and outdoor storage across Cyprus.
Installation by the EMAGCY team
We supply and install security cameras Cyprus businesses rely on. Our team in Limassol can plan the camera position and detection distance, run the PoE cabling, connect the relay outputs and set up remote viewing. For a complete fire system, combine it with our Ajax EN54 wireless fire alarm range. See all our IP cameras and security cameras.
Good to know
This is a professional thermal camera for fire detection. For buildings that legally require a certified fire alarm system, the camera should be part of a design approved by your fire safety engineer. Ask us on WhatsApp if you are not sure which solution your site needs.
Dahua HY-FT443HFP: technical specifications
Feature
Details
Model
Dahua DHI-HY-FT443HFP (Wisualarm Flame Detection Network Camera Pro)
Thermal sensor
Uncooled VOx, 256×192, 12 µm, 8–14 µm, NETD ≤50 mK
Thermal lens
3.2 mm, 57°×44°, F1.1
Visible sensor
1/2.7" CMOS, 5MP 2592×1944
Visible lens
4 mm, 78°×41°, F1.6
Flame detection
Triple-IR 3.8 / 4.5 / 5.0 µm, 3 sensitivity levels
EN 54
Class 1: 25 m, Class 2: 17 m, Class 3: 12 m (0.1 m² n-heptane)
Smoke & flame AI
Up to 30 m
Temperature range
−10°C to +500°C, ±5°C or ±5%
IR illumination
Up to 50 m
Audio
Built-in mic and speaker (≥70 dB), RCA in/out
Alarm I/O
3 inputs, 2 relay outputs (30V DC 1A / 50V AC 0.5A)
Network
1× RJ-45 10/100/1000, ONVIF
Storage
microSD up to 256GB, FTP, NAS, SFTP
Power
PoE 802.3af or 12–24V DC, max 13.1 W
Protection
IP67, −40°C to +60°C, humidity ≤95%
Size / weight
271 × 123.2 × 109.5 mm, 1.71 kg
More details are on the official Dahua HY-FT443HFP page.
Dahua HY-FT443HFP: frequently asked questions
Is it a thermal camera?
Yes. It has a 256×192 thermal sensor, plus a 5MP colour camera and three infrared flame sensors.
Can it work with my existing NVR?
Yes, for video it supports ONVIF. Fire and temperature alarms work through the camera itself and its relay outputs.
Does it replace smoke detectors?
Not always. It is ideal for large or open areas. Ask us or your fire engineer for indoor rooms.
Is a power adapter included?
No. Use a PoE switch or NVR, or a separate 12–24V DC supply.
Dahua HY-FT443HFP: price and same-day delivery
Order this flame detection camera from EMAGCY: it is in stock locally, with free same-day delivery in Limassol, or delivery across Cyprus, plus professional installation and local support. Message us on WhatsApp for a site survey or a project quote.