Dap ia-270 class-d amplifier with 2 x70 w at 4 ohms

Compact design for fixed installations

Input forwarding switch for stereo and parallel mono modes

Individual 100-Hz high-pass filter for both inputs

Rear-side volume control for each channel with peak LED

Line-level link output with pre/post volume for flexible scaling of cascaded systems

The DAP IA-270 2x 70 W Amplifier is a compact and stylish audio power amplifier for fixed installations. It has an internal high-pass filter (100 Hz) that can be activated per channel by a switch on the back. The IA-270 has jack inputs as well as balanced terminal inputs that are looped through to terminal outputs. You can choose to forward the original audio signal or have the gain settings applied to it. You can use the amplifier as a stereo amp, but with the audio loop through you can also set it up as a dual mono amp. Thanks to its fanless convection cooling, the amp is completely silent in operation.

The extruded aluminium housing follows the design of existing DAP audio tools, albeit in a slightly larger footprint. The height of the unit is a mere single rack space (1 U). All controls are deliberately put on the back in order to prevent unintentional changing during daily operation. LEDs on the front indicate the status of the amplifier.

Outputs

RMS Output Power Amplifier 70 W

Output Channels 2

Output Mode Parallel, Stereo

Output Connector Terminal

Passive Output Connector Terminal

Inputs

Stereo Inputs 2

Stereo Input Connector Phoenix, TRS balanced 6.3 mm

Electrical Specifications and Connections

Power Supply 220V-240 VAC 50 Hz

Power Consumption 160 W

Power Connector in Power Pro Blue

Mechanical Specifications

Height (mm) 52 mm

Width (mm) 165 mm

Length (mm) 210 mm

Housing Aluminium

Colour Black

Weight 1.35 kg

IP Rating IP20 (indoor use only)

Amplifier Cooling Convection

Thermal Specifications

Maximum Ambient Temperature 40 °C

Included Items

Included Cables Power Pro Cable