Tools, equipment

Design for 6 wheels to make it stronger. Easy and cozy to lie on the creepers. The creeper with foam inside and a concave design to make you easy and cozy to lie on. W x D x H: 1060 x 460 x 155 m VAT not incl.

Size: Dr. 3/8" x H7 * Length: 36mm * Application: BMW Specially designed to replace the brake lining.VAT not incl.

When replacing the timing chain, this tool can block the flywheel. It helps to release and tighten down central bolts on the vibration damper.Applicable to BMW, Mini 1.4, 1.6, 1.8, 2.0, 2.5, 3.0 petrol and Diesel engines (M47T2, M47TU, M57T2, M57TU, M67, N45, N45T, N46, N46T, N51, N52, N53, N54, W17) as fitted to e.g. BMW 1 Series, 3 Series, 5 Series, 6 Series, 7 Series, X1, X3, X5, X6, Z4, and Mini One D.Engine codes: N43 B16A/AA, N43 B16AA, N43 B16AA/O0, N43 B20A, N43 B20A/AA, N43 B20AA, N43 B20AY, N43 B20K0, N45 B16A, N45 B20AA, N45T B16AC, N46 B18, N46 B20, N46 B20B, N46T B20, N46T B20B, N46T B20BD, N46T B20BZ, N46T B20O2, N52 B25A, N52 B25AE, N52 B25AF, N52 B25BE, N52 B25O1, N52 B30A, N52 B30AF, N52K B25A, N52K B25A/O1, N52K B25AE, N52K B30A, N52K B30A/O1, N52K B30AE, N52K B30AF, N53 B25A, N53 B30A, N53 B30A/O0, N54 B30A, N54 B30A/AA, W17D14) VAT not incl.

Install the socket onto the wheel nut for removal/installation. A specially designed socket can work fast and without damaging the wheel nut protection jacket. Material: CRV Size: Dr.1/2 x 50mm(L) Applicable to: Maybach and Mercedes 221 S-class and late model CL-class. Fits Mercedes wheel lug bolt part number 000 990 5407VAT not incl.

Material: CR-V Size: Dr. 1/2" x 88 mm(L) Application: Maybach and Mercedes C-Class, GLK( W204), E-Class(W211/W212/W207), SLK(W172), M-Class(W164/W166),CL-Class(W216),S-Class(W221/W222) Which came installed with unique convex lug bolts (Mercedes # 000 990 5407). Specially designed to loosen and tighten the new special wheel bolts found on. Mercedes vehicles. Approved for use with an impact wrench.VAT not incl.

For Removing the front crankshaft ( pulley) seal at the vibration damper Application : VW & Audi late models. NW.: 0,64kgs. VW OEM Number 3203 VAT not incl.

For Installing crankshaft pulley, camshaft and intermediate Shaft oil seals, 4 pieces/set Application: VW Golf Rabbit, Fox, GTi, Scirocco, Audi All except V8 N.W: 0.5 kgs VW OEM no. ref.: 10-203 VAT not incl.

The master tie rod tools easily replace inner tie rod ends without removing the rack & pinion. Large size than JTC-1839 Capacity: 40~47mm VAT not incl.

The special design of cone tool makes piston ring into cylinder sleeve easily, Used to quide the piston into the cylider sleeve during piston installation. Volvo OEM number: 9998006 Application: TD112 engine VAT not incl.

Instructions: While servicing a damaged engine, use this lifting tool with a lifting device to hang the camshaft up to avoid collision. Make marks before removing the camshaft for quick and precise installation. OEM Number: 9998264 Application: All Volvo (Ex: D12, D13 engine) Load capacity: 40KG. For lifting the camshaft only. NOT suitable for other purposes.VAT not incl.

Product Specifications /Features: For removing the mounting bolts of the axle on the Mercedes Benz Actros ¾’’ Dr, 32 STAR EPL, 50mm Length Application: MB ActrosVAT not incl.

Product Specifications /Features: For removing the mounting bolts of the axle on the Mercedes Benz Actros ¾’’ Dr, 32 STAR EPL, 50mm Length Application: MB ActrosDounload pdf:Arios-A1557-50VAT not incl.

For setting PDE unit injectors Scania OEM Number ref: 99414VAT not incl.

For the restoration of the drum brake. For opening and fixing the brake shoes retaining spring, and dismantling And assembly of the jaw pins. With drive spindle for continuous opening. Applicable: VOLVO N7, 10, 12; F7, 12, 16; FH12, 16; FL7, 10, E and EC series. Volvo OEM : 9998550 VAT not incl.

Used for removing and installing poly drive cylinder head nuts. 1/2" Drive x M10S (10mm) Ribe / PolyDrive cylinder head bolt socket (168mm long). Application: Volkswagen Audi V6 and 4 cylinders 5 valve engines. OEM Tools: T10070  VAT not incl.

Constructed of sturdy steel, these car dollies are designed to withstand the weight of your car for easy maneuverability. and feature four swivel casters to allow you to shift and move your project anywhere in your garage with ease. These rust-resistant car dollies are a must-have for anyone working on a car at home and professional auto workers alike! Arios Model: TRF0322 Heavy-duty steel construction for strength and durability No-slip diamond tread Each dolly has four swivel casters for great maneuverability Two locking casters per dolly Rust-resistant finish Capacity: 450 kg NW: 18 kg Sell by Pair  VAT not incl.

Head material: CR-V Polished: Mat finish Grip material: TPR Spec: 4P Length:279 mm VAT not incl.

This high-quality base has a very strong magnet that is easily activated With a convenient switch and can attach to flat or round surfaces Up to 45 lbs. of magnetic pull to keep work in perfect alignment Product Dimensions: 10.8" x 4.1" x 2.8" Polished chrome control arm, infinitely adjustable for exact alignment Travel dial indicator from 0.0" to 1.0", gains of 0.001" Includes 9-1/2"H base with 6-1/2" control arm, dial indicator gauge and custom-fit protective case VOLVO OEM no.ref.: 9989876/999696VAT not incl.

For Removing left and right front camshaft oil seals Application: VW VR6, Audi V6 NW.: 0.902 kgs VW OEM Number ref: 3240 VAT not incl.

Specially designed to remove crankshaft, and camshaft position sensor *seals. Applicable: VAG all engines except diesel. VM OEM number ref: 2085 N.W: 0416kgs VAT not incl.

🌪Steam Machine 10 Bar ⚙️ Multipurpose Italian manufacturing tool, perfectly suited for car detailing studio or any other technical use. Suggested application fields: •Mobile Carwashing Or Washing Station •Repair Workshop •Gum And Graffiti Removal •Industrial Machine And Tools Cleaning •Cleaning Of Sport Equipments And Places •Cleaning Of Rooms And Equipment For Animals •Urban Weeding •Food Industries Output 2 guns 🚀🚀 • wet steam • dry steam • neon steam 🦠 (full disinfection) The machine is used for 1 year, guarantee valid until 2022 ✨ List of other extras: 💧Water tank 85l ⚡️Einhell Power Generator 3,100 W 💨Einhell TE-AC 270/50/10 Air Compressor 🛤Metallic custom rails More videos can be provided, please call

Car/van motor traders small axle stands in excellent condition.

TelWin Κολληση Co2.600Α.Υδροψυκτη.Παλμικη και Συνεργειακή.Εξειδικευμενη για ολα τα μεταλλα.Δουλεύει και με ηλεκτρο.Extension κεφαλης 30Μ.Ελαφρώς μεταχειρισμένη.

A car pulling tool, iron rode for pull the car, Black Color. Εργαλείο έλξης αυτοκινήτου, σιδερένια ράβδος για τράβηγμα του αυτοκινήτου, Μαύρο χρώμα

6pcs Light and tool kit

Made In Germany. New Screwdriver Kit

Made In Germany Complete Zyklop ratchet Speed Set 29 Pieces 3/8” metric

cobra trapshooter

brand new

brand new with 2 battery

Ιngersoll Rand - ΤΙΤΑΝΙΟ, μπουλονόκλειδο αέρα 1/2" με προστατευτικό κάλυμα. ΒΑΡΕΟΥ ΤΥΠΟΥ - Ο βασιλιάς των εργαλείων αέρα!Maximum Torque 780 ft.-lb. (Reverse) - ΕΛΑΦΡΥ - ΚΑΙΝΟΥΡΙΟIngersoll Rand - Titanium, 5 cfm 2135TiMAX Series Air Impact Wrench, 1/2 Inch, 1250 ipm, 780 ft.-lb., Weight: 3.95 lb, Includes Heavy Duty original cover

kainourgio mexri 500 kg

new case with tools 172 pcs

Diesel Injector Extractor master kit

Rockforce Liprometro 1/2;28-210NM

Krikkos, 3.5Т brand new

Air gun for professional car tyres service or for hobby work brand new

stand tis mixanis olokainourgio

It could be adjusted radian by demand. Use with 14" body blade(JTC-3527 or JTC-3528 not included)VAT not incl.

The tool is used for removing and installing the plastic fuel tank lid. Applicable: BMW (F01/F02/X3/F25/F30) VAT not incl.

Differential Bush Tool E38/E39 For renewal and install of front and rear differential bushes BMW rubber bush numbers(33171090389 ; 33171090099; 33171091685) Comes in convenient carry case Package weight 3.1 kgsVAT not incl.

Product Specifications / Features: The hardest material, s45c & heat treated Shiny surface treatment, just like mirror. The best quality in the field. Arios-A1022-A BMW VISCOUS FAN NUT WRENCH (32mm) Removes lock nuts on ermo-viscous fans found on FORD, BMW…Many vehicles. NW: 0.42kgs Length：383mm / Hardness：HRC 40~45 Arios-A1022-B BMW PULLEY HOLDER Allows the technician to hold the water pump pulley in place while loosening the radiator fan. NW: 0.38KGS Length：400mm / Hardness：HRC 40~45Arios-A1022-C Mercedes-Benz FAN CLUTCH WRENCH (65mm) Special open-ended spanner to allow removal and replacement of the radiator fan hub. Application: MERCEDES engines m103(6-cylinder), m104 (6-cylinder 4-value), m119 (8-cylinder 4- value), m120(12-cylinder 4-value). NW: 0.5KGS Length：395mm / Hardness：HRC 40~45 Arios-A1022-D Mercedes-Benz REACTION WRENCH WITH 3 HOLES Required to remove the radiator fan hub, the reaction spanner is bolted to the front face of the hub. The poly-v belt is not in place and cannot be used to lock the hub. Application: MERCEDES c- and e-class engines m111 (4-cylinder 4-value), om406 om605 and om606. slim handle for tight space operation. Length：410mm / Hardness：HRC 40~45 Arios-A1022-E Mercedes-Benz VISCOUS FAN NUT WRENCH (36mm) For undoing the retaining bolt on MERCEDES radiator fans. Applications: MERCEDES engines m111, om604, om605 and om606 (c- and e-class). Length：343mm / Hardness：HRC 40~45 Arios-A1022-F Mercedes-Benz HOLDING TOOL To allow removal of the visco-coupling on the cooling fan. Application: on MERCEDES engines m103 m104 Length：282mm / Hardness：HRC 40~45 Arios-A1022-G Mercedes-Benz FAN BELT SERVICE WRENCH This universal tool has been designed to service Mercedes Benz Nissan quest mercury villager radiator fans and pulley belts the three in-one design allows servicing three separate areas of repair all of which require a specialty tool due to their confined locations. This special wrench can be used for loosening the A/C idler pulley tensioner lock-nut for a/c belt adjustment or replacement 8m/m & 10m/m bit included. NW: 0.7KGS Length：489.5mm Arios-A1022-H Mercedes-Benz REACTION WRENCH WITH 3 HOLES (o 11.7) For holding fan pulley while loosening or tightening screws on viscosity fan coupling. Applicable：M112, 113, 119, .985 (1996-2003)  VAT not incl.

On car maintenance For replacement of the rear sub-frame differential metallic bush. Applicable:BENZ W210,W202,W203,W140,W220 MB Genuine bush number: A129 351 2142 Save time and money for maintenance. N.W.:3.3KGS VAT not incl.

ABS resin material case, against impact Easy installation on the wall or the ceiling SK5 material spring, high durability PU and tetoron air hose can bear up to 300 psi (20bar) High impact and corrosion resistant Suitable for commercial workspaces, industrial workspaces, automotive garages, and machine shops Free rotation within 180°, and can be installed at 45°, 90°, and 135° fixed angle Specification:Model No. XB280H Name Air Hose ReelSpecification 8 mm × 12 mm × 10 M 5/16" × 15/32" × 33 ft Max. Pressure 200 psi VAT not incl.

Pressure Switch for NCSE30 VAT not incl.

Features * Extra Large cylinder design more powerful. * Easy loading magazine. * High capacity magazine means less time is spent on reloading. * Ergonomically design for continuous operation.Application * Cabinet. * Furniture. * Construction. * Upholstery work * Other kinds of fastening workFastener Gauge:21 Thickness: 0.65mm / 0.026 inch Width: 0.95mm / 0.037 inch. Crown: 12.9mm / 0.508 inch Length: 6-16mm / 1/4-5/8 inchTool Specification Length: 225mm / 8.86inch Height: 145mm / 5.71inch Weight: 0.82kg / 1.81lb Pressure: 60-100 psi / 4-7 kg/cm Magazine capacity: 160VAT not incl.

Features * 360 adjustable exhaust port * Combination trigger. * Quick top loading magazine. * Comfortable handle with rubber. * Strong & lightweight die cast body.Application * Drawers * Paneling * Flower boxes * Cabinet work * Door & window casting * Book case * Woodentoys .Fastener Gauge:18 Thickness: 1mm / 0.040 inch Width:1.25mm / 0.05 inch. Crown: 5.8mm / 0.23 inch Length: 15-40mm / 5/8-1-1/2Tool Specification Length: 360mm / 14.2inch Height: 270mm / 10.6inch Weight: 2.10kg / 4.45lb Pressure: 60-100 psi / 4-7 kg/cm Magazine capacity: 100VAT not incl.

Strong & lightweight die-cast body. 360 adjustable exhaust port. Quickly released the cover for easy jam removal. Adjustable depth control. Comfortable handle with rubber.Application. Bookcases. Drawers. Window trim. Paneling. Cabinets.Fastener Gauge:18 Thickness: 1mm / 0.040 inch Width:1.25mm / 0.05 inch Length: 20-50mm / 3/4-2Tool Specification. Length: 250mm / 9.8i inch Height: 200mm / 7.9 inch Weight: 1.43kg / 3.15 lb Pressure: 60-100 psi / 4-7 kg/cm Magazine capacity: 100 VAT not incl.

Features. The new single body valve design can increase compression efficiency And make maintenance very convenient.By adopting the most superior cast iron material. This air compressor is designed for industry use thus it is super water resistant. With The multi-blade heat dissipating fan, forced cooling, the heat dissipating system, Of this compressor is consider the best.Usage Suitable for use in factories automatic systems auto service, Finishing and any works requiring compressed air MODEL:CE30160 POWER:3HP CAP : 351 L/min Press:8kg Tank CAP:155L ELECTR:240V 50HZ NOISE LEVEL 88dBA VAT not incl.

Cutting Capacity: 1.2mm(Steel)/ 1.4mm (Alum) Width of cut(mm):5.6mm Free Speed(rpm): 2500 Overall Length: 8.46 inch/ 215mm Air Inlet (pt): 1/4" Air Hose ID: 3/8" Avg.Air Consumption: 7 scfm/ 198 ltr/min. Net Weight: 2.51 lbr / 1.14kg Air Working pressure 90 psi/ 6.3kg/cm Sug. Air Compressor(HP): 2HP VAT not incl.

Features Using completely enclose box and the principle of air convection to obtain automatic cooling effect. Equipped with automatic device for easy operation. Handsomely designed and dust proof.Usage Laboratories,Dental clinics,cottage industries Or places that require silent NCSE30 3HP-2.20 KW 300 LTR per minuteVAT not incl.

Extra-long 1/4" Dr. flexible extension bar. Allows easy access in tight spaces.ITEM SPEC 3741 1/4" Dr.x6" 3001 1/4" Dr.x18" VAT not incl.

Special extra-long design. Material is the chrome molybdenum. Easy to use in the confined space, such as pulley core screws and the water tank frame screws, etc.  ITEM SPEC LENGTH 3226 8x10 235 3219 10x12 291 3220 12x14 328 3211 13x15 368 3212 14x17 368 3221 16x18 407 3222 17x19 407 322819x21415 3227 22x24 430VAT not incl.

Special extra-long design. Material is the chrome molybdenum. Easy to use in the confined space, such as pulley core screws and the water tank frame screws, etc.  ITEM SPEC LENGTH 3226 8x10 235 3219 10x12 291 3220 12x14 328 3211 13x15 368 3212 14x17 368 3221 16x18 407 3222 17x19 407 3228 19x21 415 3227 22x24 430VAT not incl.

Special extra-long design.Material is the chrome molybdenum. Easy to use in the confined space,such as pulley core screws and the water tank frame screws, etc.  ITEM SPEC LENGTH 3226 8x10 235 3219 10x12 291 3220 12x14 328 3211 13x15 368 3212 14x17 368 3221 16x18 407 3222 17x19 407 322819x21415 3227 22x24 430VAT not incl.

Special extra-long design. Material is the chrome molybdenum. Easy to use in the confined space, such as pulley core screws and the water tank frame screws, etc.  ITEM SPEC LENGTH 3226 8x10 235 3219 10x12 291 3220 12x14 328 3211 13x15 368 3212 14x17 368 3221 16x18 407 3222 17x19 407 322819x21415 3227 22x24 430VAT not incl.

Special extra-long design.Material is the chrome molybdenum. Easy to use in the confined space, such as pulley core screws and the water tank frame screws, etc.  ITEM SPEC LENGTH 3226 8x10 235 3219 10x12 291 3220 12x14 328 3211 13x15 368 3212 14x17 368 3221 16x18 407 3222 17x19 407 322819x21415 3227 22x24 430VAT not incl.

Special extra-long design. Material is the chrome molybdenum. Easy to use in the confined space, such as pulley core screws and the water tank frame screws, etc.  ITEM SPEC LENGTH 3226 8x10 235 3219 10x12 291 3220 12x14 328 3211 13x15 368 3212 14x17 368 3221 16x18 407 3222 17x19 407 322819x21415 3227 22x24 430VAT not incl.

Special extra-long design. Material is the chrome molybdenum. Easy to use in the confined space, such as pulley core screws and the water tank frame screws, etc.  ITEM SPEC LENGTH 3226 8x10 235 3219 10x12 291 3220 12x14 328 3211 13x15 368 3212 14x17 368 3221 16x18 407 3222 17x19 407 3228 19x21415 3227 22x24 430VAT not incl.

Special extra-long design. Material is the chrome molybdenum. Easy to use in the confined space, such as pulley core screws and the water tank frame screws, etc.  ITEM SPEC LENGTH 3226 8x10 235 3219 10x12 291 3220 12x14 328 3211 13x15 368 3212 14x17 368 3221 16x18 407 3222 17x19 407 3228 19x21415 3227 22x24 430VAT not incl.